Mavic PRO | How to link using a link command
Link method using Mavic PRO (Mavic Pro) link command
1: With the drone body set to RC mode, turn on the power of the transmitter (propo).
By the way, how to turn on the power of the propo, press the power button once, then press the power button for a minimum of 2 seconds more quickly.
2: Turn on the power supply of the drone body.
As with the propo, press the power button once and press the power button for at least 2 seconds.
3: Press the C1 / C2 button on the transmitter (propo) and the record button.
4: At this time, the transmitter will beep, so “Press the shutter button there.
Please refer to the picture for the button position.
5: “BINDING” is displayed on the screen of the transmitter at this time.
6: Press the link button on the drone body.
7: When the LED of the drone body switches from yellow blinking to dark off, it is evidence of link success.